What is...allergy immunotherapy?
If you suffer from allergies to substances such as grass pollen, dust mites, and mould, one way to ease your symptoms is through allergy immunotherapy. Through this preventive treatment, you receive gradually larger doses of the allergen causing your problems, thereby building up immunities. Here’s more about it.
How does it work?
With incremental exposure of a given allergen, your immune system gradually adapts to the substance. Initially, doctors use skin and blood tests to pinpoint the specific allergens. Once the allergen is identified, treatment using allergy shots (known as subcutaneous immunotherapy or SCIT), can alleviate symptoms. SCIT treatment can also potentially change the immune system, preventing the development of new allergies.
Another approach uses tablets or drops (known as sublingual immunotherapy or SLIT), which also reduces symptoms. But, unlike SCIT, SLIT treats only ragweed or grass pollen, and doesn’t prevent the development of new allergies. While available in many other countries, this process has not yet received FDA approval in the U.S.
No matter what approach you try, your doctor should make sure you’re an appropriate candidate for immunotherapy. In some cases, like during a severe asthma episode, your physician may recommend against getting the treatments.
Fast facts
- British physicians Leonard Noon and John Freeman discovered allergen immunotherapy in 1911
- Allergy shots are given in two phases: a shot once or twice a week for about three to six months, followed by once or twice a month for several years
- It takes three years for hay fever treatment to be more effective than a placebo, according to a recent study
- Allergy shots for older patients reduced symptoms by 55 percent after three years of therapy, and decreased the amount of medication needed for relief of symptoms by 64 percent
- Taking antihistamines has been shown to increase the effectiveness of treatments
Clear the air
Whether you’re considering allergy immunotherapy or another route to help your asthma and allergy symptoms, here are some helpful ways to clear the air in your home:
- Fill your home with indoor plants that can improve indoor air quality
- Wash bedding in hot water and don’t hang laundry outside to dry, since pollen can stick to fabric
- Remove outdoor clothes before entering your home
- Use a smart air purifier with a HEPA filter, like Coway Airmega, that can remove allergens from the air
Disclaimers
1Airmega air purifiers have been proven to trap dust, pollen, dander in the air based on KCL(Korea Conformity Laboratories) testing. They have been tested according to the Korea Air Cleaning Association standard (SPS-KACA 002-132:2022 Modified) to measure the 0.01㎛ size of particle removal rate. It was tested on maximum airflow speed in normal room temperature and humidity conditions. The performance may vary in the actual living environment of customers. Tested with Airmega Aim, 50, 100, 150, 160 Tower AP-1216L, Mighty AP-1512HH, MightyS AP-1512HHS, 200M, Icon, IconS, 230, 240, 250, 250S, 250Art, 300, 300S, 350, 400, 400S, 450, ProX
2 Our HEPA filter complies with IEST-RP-CC007 standards at speed level 1 as tested by SGS (Société Générale de Surveillance). SGS's test report only reflects SGS's evaluation of the sample and does not reflect the evaluation of the batch of goods from which the sample was taken. Tested with Airmega 100, 150, 160, Mighty AP-1512HH, MightyS AP-1512HHS, 200M, 230, 240, 250, 250S, 250 Art, 300, 300S, 350, 400, 400S, 450, ProX
3 Tested by KCL(Korea Conformity Laboratories) according to JEM 1467: 2015 condition, the concentration of acetic acid was proven to be reduced up to 99.5% in 60 minutes. Results may vary depending on actual environment. Tested with Airmega 150, Mighty AP-1512HH, 200M
4 Tested by KCL(Korea Conformity Laboratories) according to SPS-KACA002-132:2022, showed result of over 99.5% removal rate of common household gases including Ammonia, Acetaldehyde, Acetic acid, Formaldehyde, Toluene, Benzene, Nitrogen dioxide (NO₂), and Sulfur dioxide (SO₂) within 30 minutes. Results may vary in different environments and not all odors or gas particles may be removed. Tested with Airmega MightyS AP-1512HHS, 250S, 300S, 400S, 350, 450
5 Test conducted using Coway Allergen filter media (5×5 cm) placed in a polyethylene bag. The allergen solution and sample were immersed in 2 mL of phosphate buffer (100 ng/mL) prior to the reaction and heat-sealed to specimen size. The reaction was maintained at 4°C for 24 hours. Nichinichi Pharmaceutical Co., Ltd. conducted the test using ELISA to measure allergen concentration. Results may vary in actual product usage environments. Tested with Airmega Mighty AP-1512HH, 200M
6 Removal rates of Ammonia (NH₃) and Hydrogen Sulfide (H₂S) were tested in a 1 m³ chamber under EL608:2023 conditions for 30 minutes. Gas Detector Tubes were used for measurement, and testing was conducted by KCL (Korea Conformity Laboratories). Results may vary in actual product usage environments. Tested with Airmega Mighty AP-1512HH, 200M
7 Reduction rates of Naphthalene, Sulfur Dioxide, and Nitrogen Dioxide were tested using the Airmega Mighty AP-1512HH in 1㎥ chamber, following JEM-1467:2015 standards. Tests were conducted by Intertek. Actual performance may vary depending on the living environment. Tested with Airmega Mighty AP-1512HH, 200M
9 Tested by KCL(Korea Conformity Laboratories) according to SPS-KACA002-132:2022. The test was conducted with Methyl mercaptan, Isovaleraldehyde, Isovaleric acid in a 1.0±0.1 m³ chamber with a test time of 60 minutes at (24±4)°C and (46±10)% Relative Humidity. A removal ratio of over 99.5% was achieved. Results may vary depending on the actual usage environment. Tested with Airmega 350, 450
10 Tested by the Guangzhou Institute of Microbiology, exposed the filter media to protein solutions for 24 hours under ISO 4333-2022 standard. The results showed strong reduction performance: >99.79% for pollen, >99.60% for dog allergen, >99.90% for cat allergen, and >99.80% for dust mites matter allergen. Actual results may vary depending on room size, airflow, and pollutant levels. Tested with Airmega 350, 450
11 Tested by KCL(Korea Conformity Laboratories) according to SPS-KACA002-132:2022. The test was conducted in a 1.0±0.1 m³ chamber for 60 minutes at (24±4)°C and (46±10)% Relative Humidity. A removal ratio of >99.5% was achieved for Formaldehyde and Toluene in 60 minutes. Results may vary depending on the actual usage environment. Tested with Airmega 350, 450
12 Tested by Intertek. The evaluation was conducted against designated test materials: Sulfur dioxide, Nitrogen dioxide, and Naphthalene. The test was performed in a sealed 1.0×1.0×1.0 m (1.0 m³) odor chamber at a test room temperature of (23±2)°C (measured between 23.6∼23.9°C) and a test room humidity of (45±5)% R.H. (measured between 40∼48)% Relative Humidity. It met the odor removal rate of ≥99.9% for Sulfur dioxide, Nitrogen dioxide, and Naphthalene. Results may vary depending on the actual usage environment. Tested with Airmega 350, 450
