Authorized Resale Policy
Coway Co., Ltd. (the “Brand Owner”) hereby adopts this Resale Policy (this “Policy”) and requires that each person, firm or entity (as applicable, a “Reseller”) that purchases Brand Owner’s products (the “Products”) for resale or other distribution agree to comply with this Policy.
Any Reseller that fails to comply with this Policy will be deemed an unauthorized reseller of the Products, and as such, shall have no right to: (i) sell the Products, (ii) use Brand Owner’s intellectual property, including any of its trademarks or copyrights, or (iii) offer Brand Owner’s consumer warranty applicable to any of the Products.
- This Policy applies to all resales of the Products. Regardless as to where the Products were acquired, either directly from the Brand Owner, through an authorized distributor, or some other procurement method, a Reseller must comply with the terms of this Policy.
- Sales to End Users Only. Unless otherwise agreed with Brand Owner in writing, Reseller may only purchase Products for resale to consumers and end user customers, and Reseller may not resell Products to other Resellers, distributors or for further distribution in any manner.
- No Sales on Online Marketplaces. Without the Brand Owner’s express written consent, Reseller may not advertise or sell the Products online on any e-commerce platform, specifically including, but not limited to, Amazon, eBay and Walmart. Reseller may sell Products on its own website only with express written consent by Brand Owner.
- Handling and Storage. Reseller agrees to handle and store the Products in a safe manner and in compliance with Brand Owner’s storage and handling guidelines. Reseller will ensure that any Products it purchased are stored in secure, climate-controlled warehouses.
- Product Packaging and Display. Reseller shall sell Products in their original packaging. Relabeling, repackaging (including the separation of bundled Products or the bundling of Products), and other alterations to Products or their packaging are not permitted. Tampering with, defacing, or otherwise altering any serial number, UPC code, batch or lot code, SKU or other identifying information on Products or their packaging is prohibited. Reseller may not remove, translate, or modify the contents of any label or literature on or accompanying the Products. Reseller shall not advertise, market, display, or demonstrate non-Brand Owner Products together with the Products in a manner that would create the impression that the non-Brand Owner Products are made by, endorsed by, or associated with Brand Owner.
- Trademarks; Copyrights. Resellers that comply with this Policy have a limited, non-exclusive, non-sublicensable, revocable license to use Brand Owner’s trademarks and copyrights in connection with the sale of the Products. Reseller shall not alter, modify, or change any trademark or copyright, nor shall Reseller use any trademark or copyright other than for the promotion and sale of the Products, nor shall Reseller use any trademark or copyright in any manner that negatively impacts such trademark or copyright or the Brand Owner. Failure to comply with the Policy will result in the automatic revocation of the license granted herein and a total forfeiture of the rights granted herein. Brand Owner reserves the right to revoke this license at any time for any or no reason.
- Locations / Reporting. Reseller agrees to track the Products it purchases and to store all such Products at locations in compliance with this Policy. At Brand Owner’s request, Reseller will provide Brand Owner with (a) a list of all storage locations utilized by Reseller, (b) an inventory of Products maintained at each such storage location, and (c) physical access for Brand Owner to perform an inventory to confirm the amounts and locations of Products at Reseller’s stated locations.
- Product Inspection. Promptly upon receipt of the Products, Reseller agrees to inspect the Products for damage, defects, evidence of tampering, or other non-conformances (a “Defect”). If any Defect is identified, Reseller must not offer the Product for sale and must promptly report the Defect to Brand Owner.
- Recall and Consumer Safety. To ensure the safety and well-being of the end users of the Products, Reseller agrees to cooperate with Brand Owner with respect to any Product recall or other consumer safety information dissemination efforts.
- Customer Service. Reseller will maintain customer service phone and email response functions to handle customer complaints, returns and other customer service functions. At Brand Owner’s request, Reseller will provide any reports or other information related to such customer services.
- Product Loss and Theft. If any significant quantity of Products purchased by Reseller are lost or stolen, Reseller will promptly report such event to Brand Owner.
- Report Unauthorized Resellers. If Reseller has information or reasonably suspects that any person is purchasing and reselling or distributing Products in a manner not authorized by Brand Owner or in violation of this Policy, Reseller must promptly notify Brand Owner.
- Support of Manufacturer’s Warranty. Reseller may extend to any proper purchaser of the Products the original manufacturer’s warranty in accordance with its terms. Reseller may not modify or alter the original manufacturer’s warranty, represent or characterize the original manufacturer’s warranty in any misleading manner, or extend its own warranty with respect to the Products. Failure to comply with this Policy will result in the total forfeiture of Reseller’s right to offer Brand Owner’s consumer warranty.
- Other Information, Documents and Reports. Reseller must provide Brand Owner with any supplemental information, documents and reports that Brand Owner may request in order to validate Reseller’s compliance with this Policy and to support Brand Owner’s warranty support and customer support obligations and initiatives.
Disclaimers
1 Airmega air purifiers have been proven to trap dust, pollen, dander in the air based on KCL(Korea Conformity Laboratories) testing. They have been tested according to the Korea Air Cleaning Association standard (SPS-KACA 002-132:2022 Modified) to measure the 0.01㎛ size of particle removal rate. It was tested on maximum airflow speed in normal room temperature and humidity conditions. The performance may vary in the actual living environment of customers. Tested with Airmega Aim, 50, 100, 150, Tower AP-1216L, Mighty AP-1512HH, MightyS AP-1512HHS, 200M, Icon, 230, 240, 250, 250S, 300, 300S, 350, 400, 400S, 450, ProX
2Our HEPA filter complies with IEST-RP-CC007 standards at speed level 1 as tested by SGS (Société Générale de Surveillance). SGS's test report only reflects SGS's evaluation of the sample and does not reflect the evaluation of the batch of goods from which the sample was taken. Tested with Airmega 100, 150, 160, Mighty AP-1512HH, MightyS AP-1512HHS, 200M, 230, 240, 250, 250S, 250 Art, 300, 300S, 350, 400, 400S, 450, ProX
3 Tested by KCL(Korea Conformity Laboratories) according to JEM 1467: 2015 condition, the concentration of acetic acid was proven to be reduced up to 99.5% in 60 minutes. Results may vary depending on actual environment. Tested with Airmega 150, Mighty AP-1512HH, 200M
4 Tested by KCL(Korea Conformity Laboratories) according to SPS-KACA002-132:2022, showed result of over 99.5% removal rate of common household gases including Ammonia, Acetaldehyde, Acetic acid, Formaldehyde, Toluene, Benzene, Nitrogen dioxide (NO₂), and Sulfur dioxide (SO₂) within 30 minutes. Results may vary in different environments and not all odors or gas particles may be removed. Tested with Airmega MightyS AP-1512HHS, 250S, 300S, 400S, 350, 450
5 Test conducted using Coway Allergen filter media (5×5 cm) placed in a polyethylene bag. The allergen solution and sample were immersed in 2 mL of phosphate buffer (100 ng/mL) prior to the reaction and heat-sealed to specimen size. The reaction was maintained at 4°C for 24 hours. Nichinichi Pharmaceutical Co., Ltd. conducted the test using ELISA to measure allergen concentration. Results may vary in actual product usage environments. Tested with Airmega Mighty AP-1512HH, 200M
6 Removal rates of Ammonia (NH₃) and Hydrogen Sulfide (H₂S) were tested in a 1 m³ chamber under EL608:2023 conditions for 30 minutes. Gas Detector Tubes were used for measurement, and testing was conducted by KCL (Korea Conformity Laboratories). Results may vary in actual product usage environments. Tested with Airmega Mighty AP-1512HH, 200M
7 Reduction rates of Naphthalene, Sulfur Dioxide, and Nitrogen Dioxide were tested using the Airmega Mighty AP-1512HH in 1㎥ chamber, following JEM-1467:2015 standards. Tests were conducted by Intertek. Actual performance may vary depending on the living environment. Tested with Airmega Mighty AP-1512HH, 200M
9 Tested by KCL(Korea Conformity Laboratories) according to SPS-KACA002-132:2022. The test was conducted with Methyl mercaptan, Isovaleraldehyde, Isovaleric acid in a 1.0±0.1 m³ chamber with a test time of 60 minutes at (24±4)°C and (46±10)% Relative Humidity. A removal ratio of over 99.5% was achieved. Results may vary depending on the actual usage environment. Tested with Airmega 350, 450
10 Tested by the Guangzhou Institute of Microbiology, exposed the filter media to protein solutions for 24 hours under ISO 4333-2022 standard. The results showed strong reduction performance: >99.79% for pollen, >99.60% for dog allergen, >99.90% for cat allergen, and >99.80% for dust mites matter allergen. Actual results may vary depending on room size, airflow, and pollutant levels. Tested with Airmega 350, 450
11 Tested by KCL(Korea Conformity Laboratories) according to SPS-KACA002-132:2022. The test was conducted in a 1.0±0.1 m³ chamber for 60 minutes at (24±4)°C and (46±10)% Relative Humidity. A removal ratio of >99.5% was achieved for Formaldehyde and Toluene in 60 minutes. Results may vary depending on the actual usage environment. Tested with Airmega 350, 450
12 Tested by Intertek. The evaluation was conducted against designated test materials: Sulfur dioxide, Nitrogen dioxide, and Naphthalene. The test was performed in a sealed 1.0×1.0×1.0 m (1.0 m³) odor chamber at a test room temperature of (23±2)°C (measured between 23.6∼23.9°C) and a test room humidity of (45±5)% R.H. (measured between 40∼48)% Relative Humidity. It met the odor removal rate of ≥99.9% for Sulfur dioxide, Nitrogen dioxide, and Naphthalene. Results may vary depending on the actual usage environment. Tested with Airmega 350, 450